How to Tie Classical Guitar Strings

How to Tie Classical Guitar Strings?

You may notice that your classical guitar has lost its tune quickly. So you want to tie strings to your classical guitar. But you don’t know how to tie classical guitar strings.

Many people add new strings as they put the string into the tuning peg hole with a string winger. This is not a way to tie. If you do this, the string will lose tune quickly.

In this article, we are going to discuss how to tie classical guitar strings. So you can easily tie strings to your classical guitar.

Steps-How to Tie Classical Guitar Strings

If you want to add a new string to your classical guitar, there are a few steps you need to follow in order to pass the string through the bridge. Below, we are providing steps on “how to tie classical guitar strings.” These steps are easy, and you should be able to do it alone.

Step: 1


The first thing you do when you tie the strings of your classical guitar, you need to keep the guitar’s head on your knees. It should be on the left side. It is important to thread the strings from left to right through the bridge holes.

Step: 2


Do not pass the entire string through the bridge. You need to leave about 4 to 5 inches in the end. You need to take the strings in your right hand and pass it backward and upwards to the main string.

Step: 3


You need to create a loop so that you can lie at the bottom of the bridge and cross the end of the string. Next, hold the tip that crosses the loop at the bottom. When passing the loop, you need to pull in the main string and make sure the loop is connected to the bridge.

Step: 4


When you’re done, you can cut the smaller end of the string. Now it’s time to add the string to the tuning page. When attaching the string to the tuning peg, you will need to keep guitars head in your lap and the resting guitar’s body on the table or floor.

Step: 5


In this step, you have to hold the string and keeps the loose ends through the holes in the barrel. When adding a string, you have to cross the string from the right hand to the left.

Step: 6


Now is the time to pass the loose ends with your left hand underneath the core of the string. After that, you have to use your right hand to hold of the loose. You notice that you are forming a knot with a string that is known as half hitch.

Step: 7


At this point, hold the end pull string tight with your right hand. You need to keep it tight. Otherwise, you can’t tie a classical guitar string. When you are holding tightly with your right hand, you need to begin to the tuning peg.

Step: 8


When you are tuning your peg, it should be turned in a clockwise direction. While turning the tuning peg, you will see that knot turns in the barrel. You have to continue to turn until the knot has correctly placed on the hole.

When knot has located correctly, it is time to play and enjoy your classical guitar.

Read More: Learn Acoustic Guitar Lessons for Beginners

Conclusion:


If you want to tie strings to tune your classical guitar stays longer, there are a few steps you should follow. Mention the above steps on how to tie classical guitar strings to help you tune your guitar longer.

Without following these steps, it would be difficult to tie the strings of classical guitar. So carefully follow the steps and enjoy playing your classical guitar.

95 total views, 2 views today